Tender Profile

Tender Requirements:

KEY SPECIFICATION:

a) Item Description &   b) Quantity:

NO	EQUIPMENT  TYPE	BS/DIN CAPACITY	Manufacturer Year	Used / New	Equipment Required For Phase - 1
13	FORK LIFT	3 T	Not Earlier than 2020	New	2
14	FORK LIFT	5 T	Not Earlier than 2020	New	2
16	CARGO TRUCK W / CRANE	5 T/ CRANE 3 T	Not Earlier than 2020	New	2
17	CARGO TRUCK W / CRANE	10 T/ CRANE 8T	Not Earlier than 2020	New	2
18	FLAT BED TRAILER AND TRACTOR	40 T	Not Earlier than 2020	New	3
22	TIPPER TRUCK	18 CU.M	Not Earlier than 2020	New	2
23	VACUUM TANKER	3000 GL	Not Earlier than 2020	New	10
24	VACUUM TANKER	5000 GL	Not Earlier than 2020	New	1
25	WATER TANKER	3000 GL	Not Earlier than 2020	New	2
27	FUEL TANKER	3000 GL	Not Earlier than 2020	New	1
28	FRONT - END SKID LOADER WITHOUT A/C	0.4 CU YARD	Not Earlier than 2020	New	1
29	FRONT - END SKID LOADER WITH A/C	0.4 CU YARD	Not Earlier than 2020	New	1
31	FRONT - END LOADER WITH A/C CABIN	3.0 CU YARD	Not Earlier than 2020	New	1
35	MAN LIFT 18 M	18 m WORKING HEIGHT	Not Earlier than 2020	New	1
37	LIFT ALL ( 12-16 M )	12-16 m WORKING HEIGHT	Not Earlier than 2020	New	1
41	FUEL TANKER / 1000 GL- WITHOUT DIESEL	1000 GL	Not Earlier than 2020	New	1
43	STAFF COASTER BUS	22 SEATER	Not Earlier than 2022	New 22 seater	1
44	STAFF  BUS	55 SEATER	Not Earlier than 2022	New 50 + seater	3
45	SUV	6 CYLINDER	Not Earlier than 2022	New 4x4	1
46	SUV	4 CYLINDER	Not Earlier than 2022	New	10
48	WELDING MACHINE (SMAW)	400 A/ DC 40 V/ DC	Not Earlier than 2020	New	10
49	MOBILE AIR COMPRESSOR - DIESEL	375 CFM	Not Earlier than 2020	New	2
50	MOBILE AIR COMPRESSOR - DIESEL	600 CFM	Not Earlier than 2020	New	2
55	MOBILE DIESEL GENERATOR 50 C/S	250 KVA	Not Earlier than 2020	New	1
57	DEWATERING PUMP - DIESEL	300 GPM	Not Earlier than 2020	New	3
58	DEWATERING PUMP - DIESEL	800 GPM	Not Earlier than 2020	New	2
59	TRANSFER PUMP - DIESEL	250 GPM	Not Earlier than 2020	New	1
60	TRANSFER PUMP	1000 GPM	Not Earlier than 2020	New	1
63	SLUDGE PUMP- DIESEL	250 GPM / 150 PSI	Not Earlier than 2020	New	1
66	PORTABLE TOWER LIGHT GENERATOR WITH FOUR (4) LIGHTS - DIESEL	7.5 KVA	Not Earlier than 2020	New	8

 c) Client Approval Required:

       As per **  KNPC ** Contract Specifications

 d) Following documents need to be submitted to obtain approvals from Client :

      1) GA Drawing and schematic for Fabrication of Tankers

      2) Type test certificate

      3) Stamped copy of Compliance to contract specs.

      4) Filled Signed & Stamped Data Sheet.

     

 e) Warranty: STANDARD

   f) Third Pary Inspection:

      If required, HOTECC reserves the right to appoint a Third Party Inspection (TPI) at HOTECC cost. Vendor shall also provide free access to TPI /KNPC/HOTECC representative for Inspection or witness the Inspection at Manufacturer's facility,

OTHER CONDITIONS:

1) Basis of Pricing:
     Unit price required in KD or US$ on DDP basis or Euro
     Quoted prices shall include operations & commissioning spares as per the specification

2) Deviation:
     Any deviation to the specification shall be addressed/ highlighted separately

3) Validity of offer:
     Validity of offer shall be for minimum 60 days from the date of offer and shall be automatically renewed.

4) Warranty:
     Quote shall include Payment terms and Warranty details.

5) Preferred Mode of Payment:
     LC payable at 90 days

6) INCO TERMS: DDP

REPLY TO:

RFQ.procurement@hotecc.com/ syedhussain@hotecc.com/ binny@hotecc.com

DEADLINES:

a) <Due date>: Initial Quotations

b) <a + 4 days>: Clarification

c) <b + 5 days>: Suppliers Shortlisting

d) <c + 2 days>: Final Quotations

e) <d + 3 days>: Selection and Awarding